ติดตั้ง Steam
เข้าสู่ระบบ
|
ภาษา
简体中文 (จีนตัวย่อ)
繁體中文 (จีนตัวเต็ม)
日本語 (ญี่ปุ่น)
한국어 (เกาหลี)
български (บัลแกเรีย)
Čeština (เช็ก)
Dansk (เดนมาร์ก)
Deutsch (เยอรมัน)
English (อังกฤษ)
Español - España (สเปน)
Español - Latinoamérica (สเปน - ลาตินอเมริกา)
Ελληνικά (กรีก)
Français (ฝรั่งเศส)
Italiano (อิตาลี)
Bahasa Indonesia (อินโดนีเซีย)
Magyar (ฮังการี)
Nederlands (ดัตช์)
Norsk (นอร์เวย์)
Polski (โปแลนด์)
Português (โปรตุเกส - โปรตุเกส)
Português - Brasil (โปรตุเกส - บราซิล)
Română (โรมาเนีย)
Русский (รัสเซีย)
Suomi (ฟินแลนด์)
Svenska (สวีเดน)
Türkçe (ตุรกี)
Tiếng Việt (เวียดนาม)
Українська (ยูเครน)
รายงานปัญหาเกี่ยวกับการแปลภาษา
❥ SLEEP CALL
10 minutes = $19.99
30 minutes = $39.99
1-3 hour = $69.99
4-6 hours = $99.99
10+ hours = $299.99
❥ TEXTS
good morning/night text = $4.99
per day "i love you" = $4.99
per message "i love you" with a chosen pet name after = $9.99
per message pet names pack (regular texting with additional pet name of your choice) = $69.99
❥ STATUS
putting you in my status = $34.99
putting you in my status with a pet name in front of your name = $49.99
❥ MATCHING PFPS
10 minutes of matching pfp = $9.99
30 minutes of matching pfp = $24.99
1-2 hours of matching pfp = $49.99
…………………….…………...„--~ ( ͡° ͜ʖ ͡°).'\
………….…………………… („-~~-„¸_….,/ì'Ì
…….…………………….¸„-^"¯( ͡° ͜ʖ ͡°) ¸-¯"¯/'
……………………¸„„-^"¯ ( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡'\¸„„,-"
**¯¯¯'^^~-„„„----~^*'"¯ ( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡¸-"
( ͡° ͜ʖ ͡°)„-^" : ( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡„-"
( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° ¸„-^¯
( ͡° ͜ʖ( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°) ¸„„-^¯
:.' : : '\ ( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)¸„„-~"
( ͡° ͜ʖ ͡°):"-„""***/*'ì¸'¯
:.':( ͡° ͜ʖ ͡:"-„ ( ͡° ͜ʖ\
.( ͡° ͜ʖ ͡°)( ͡° ͜ʖ ͡°)( ͡° \
seriously contagious, so much so my teammate came down with the same thing and all he did was say "A Long"
Now 4 us of have the "ick"
If all goes well, you should see on your camera the image below, and you should be detecting neutrons at this point.
Operation is quite a balancing act, since the voltage is controlled by both the power supply, but also by Paschen's Curve and Ohm's Law relating to the pressure in the chamber. Great patience is required to "Get the hang of it", but after doing so it becomes quite simple to run. Operation can be aided by an ion-gun which will not be discussed in this article.
Time to turn it on (don't forget to cover any viewports/cameras with lead! Also x-rays can pour out of ceramic feedthroughs so point them away from people. It is a good idea to be monitoring for x-rays where any people are present). The basic procedure is:
-Turn on the roughing pump and wait for sufficient backing pressure, turn on the diffusion or turbo pump and wait for it to fully warm up or achieve running speed
-Throttle the chamber back (with the valve between the diffusion/turbo pump and the chamber)
-Ever so slightly open the needle valve to the deuterium tank
-Turn up the high voltage until either plasma establishes on the camera, or you've reached 40kv and nothing has happened (don't forget, you only get one chance in your life to screw up with voltages of this degree)
-If nothing has happened, keep admitting more gas and the pressure should keep going up. Plasma should form around 40kv at about 10-15 microns of deuterium.