상점 페이지
Space Engineers
전체 토론 스크린샷 아트워크 방송 동영상 창작마당 뉴스 가이드 평가

Space Engineers

상점 페이지
Space Engineers >  창작마당 > Digi 님의 창작마당 > Projector Preview - miniature blueprint display + damage status > 토론
Projector Preview - miniature blueprint display + damage status
설명 토론4 댓글478 업데이트 노트
BassHead 2023년 4월 16일 오전 10시 17분
Preview Mode Broken In Survival Mode
I can confirm that in preview mode, the projection will disappear after a random amount of time. It happens on both small and large grids.

UPDATE: Sometimes it will only last 30 seconds and other times it may last 5-10 minutes. I have tested with all preview settings on/off and has no effect. Something triggers it but since it is random, im not sure what.

UPDATE 2: The issue is connected to all projectors regardless of how many you have. Multiple ships, etc. Also, if you activate "Load this ship" "in its current state" it will fix the one projector but all other projectors will disappear.

UPDATE 3: Finally I think I found the issue. I can not replicate the issues on new saves. The issues only happen on "possibly certain" existing survival saves. I hope this can be fixed.





I was able to replicate this issue though on an existing survival save.

1. activate "Load this ship" "in its current state"
2. Turn the projector block off and then back on.
3. This will show for turrets. https://ibb.co/gRm5wzm

Repeating step 1 again fixes the issue.
BassHead 님이 마지막으로 수정; 2023년 4월 16일 오후 1시 02분
< >
14개 댓글 중 1-14개 표시
Digi  [개발자] 2023년 4월 17일 오전 1시 35분 
It doesn't happen to me, I left it idle for about an hour and the projection was still there =)

Can you send the world where you get this issue, and point me at the projector causing it :} (either GPS or give it a unique name in terminal)


I did replicate the 2nd thing thanks :}
Digi 님이 마지막으로 수정; 2023년 4월 17일 오전 1시 37분
#1
BassHead 2023년 4월 17일 오전 7시 18분 
Thank you for getting back. I will help as best I can. I have a copy of the save below. There are mods installed but I did my due diligence and could not replicate the issue on a new save with mods regardless. When you enter the save, you will be on the main ship. The projector is called "Projector 2". Just needs to be activated. It will project right behind the flight seat.

You can also experiment by making more projectors and even adding some to the small ship above the ship outside as they will all have the issue.

Just in case it does not happen for you, since we do not know what it is, if you wait some time, try grinding, interacting, etc.

https://drive.google.com/file/d/1NSYVs6qbPiKcjTCanPbgpnmVo43b-Xzp/view?usp=share_link
BassHead 님이 마지막으로 수정; 2023년 4월 17일 오전 7시 31분
#2
Digi  [개발자] 2023년 4월 18일 오전 10시 42분 
Thanks! it happend for me too. I'm still trying to figure out what is going on though xD
#3
BassHead 2023년 4월 19일 오전 5시 06분 
Glad to hear it! It seems something is triggering it and interfering. I thought it was script related but disabling scripts did nothing. I disabled all mods besides this one on that save and did nothing. I can only assume 1 of 2 things. 1, The save is still running a part of a mod that is conflicting or 2, regardless of mods, this mod conflicts on existing saves. I wish I could be of more help. I'm rooting for you.


For the other issue you said you were able to reproduce with the turret barrels showing outside of the ship, it seems to affect all gun barrels. They do not project on entering a save for the first time or "in its current state". Only turning the projector off and then back on.

Before:
https://drive.google.com/file/d/1lsj9sczgiHAFYnLFJnI2Ndw00CWy2u9T/view?usp=share_link

After:
https://drive.google.com/file/d/1FHzTS82_aVLqwBm_cSU-0BmubKYfyD33/view?usp=share_link
BassHead 님이 마지막으로 수정; 2023년 4월 19일 오전 6시 18분
#4
Digi  [개발자] 2023년 4월 19일 오후 8시 00분 
They show up barrel-less in vanilla projector too, they made some changes to that subpart handling xD

Anyway, the projection vanishing was a weird combination of me spawning it wrong in a thread and meteorites spawning causing my projection to be deleted because it supposedly collided entityIds... I dunno, but my changes seem to've fixed it at least =)

Mod's updated with the fixes, thanks again for the reports :}
#5
BassHead 2023년 4월 19일 오후 8시 28분 
Very interesting. I would not have guessed that. Amazing job! Confirmed fixed. Almost perfect. One issue, the turrets/cannons and doors now are static. They stay when the ship moved.

https://drive.google.com/file/d/1mTPf6lBNcgdhIbMnUNAOBC63cOfURioZ/view?usp=share_link
BassHead 님이 마지막으로 수정; 2023년 4월 19일 오후 8시 29분
#6
Digi  [개발자] 2023년 4월 20일 오전 8시 59분 
This is one of those times where you fix one thing and break another =) the barrel floating fix is what caused this one, it'll take more fiddling to find out how to fix both xD
#7
BassHead 2023년 4월 20일 오전 9시 32분 
I know how it goes. No worries. I figured. Im sure you will get it fixed!
#8
BassHead 2023년 4월 28일 오전 5시 22분 
Just checking in. Are you getting close or is it proving to be a thorn in the rear?
#9
BassHead 2024년 2월 14일 오후 1시 30분 
Took a break and came back to see that this issue still exists. Were you able to figure out what triggers this? I seems to be after a short time. Triggers after the projection has been active for a minute of 2. These projection parts become static after moving.

https://drive.google.com/file/d/1Afy65_3QkZDEzdCM_9wedBWPMi02LTIB/view?usp=sharing

Also, the floating barrel issue still somewhat exists (partially built) but from what I can tell, doesnt happen if meteorites are turned off. Related to what we talked about previously.

WORK AROUND: For now, I am using a timer block to make the "...As built & Fixed" and "In its current state" script option occur automatically this is a bandaid fix. This is every set amount of configurable seconds. Since this issue appears after some minutes, resettiing the projection every 60 seconds prevents or at least fixes this issue if it occurs. Not ideal, but at least its automated.
BassHead 님이 마지막으로 수정; 2024년 2월 16일 오전 10시 04분
#10
Digi  [개발자] 2024년 2월 16일 오후 5시 06분 
I hope these fixes stick, but if there's still ghostly subparts I can hotfix and hide all of them =)
#11
BassHead 2024년 2월 17일 오전 5시 48분 
I hope too. Hey, worst case scenario, that would work. I will give it a try and test.

Update: I was not able to reproduce the issues. I think your fixes stuck. You are awesome. <3
BassHead 님이 마지막으로 수정; 2024년 2월 17일 오전 6시 30분
#12
BassHead 2024년 2월 20일 오후 12시 03분 
The only other issue I saw is that certain colors will make the blocks remove the 'haze' effect on the projection. They will look different than the other blocks. For example color #B27700. I think it has to do with choosing a custom color.
BassHead 님이 마지막으로 수정; 2024년 2월 20일 오후 12시 07분
#13
Digi  [개발자] 2024년 2월 20일 오후 5시 08분 
That is probably outside of my control, unless it doesn't happen for vanilla projection?

One issue I found which is kinda bad involves swapping between build and preview mode with projection perfectly matching the existing one in terms of position (which is easier now with the alignment feature automatically triggering on Use-this-ship), causes the build projection to be lost after a few cycles :( And the same thing works fine in SP, so I dunno when I'll get to finding that or even redesigning the code as it's quite the old and messy there =)
#14
< >
14개 댓글 중 1-14개 표시
페이지당 표시 개수: 1530 50