Подпишитесь, чтобы загрузить
[XM] Path Bridge Over Splash Waterfall

2 large waterfalls with a wide path bridge over the water rapids in front of the main waterfall with 2 ride tunnels. The 1st long tunnel is underneath (see screenshots) the path bridge which would serve well as a coaster or water rapid ride tunnel. This blueprint has the makings to be a beautiful centerpiece for a ride or coaster foundation.

The bridge will accomondate a path 7m wide while the path steps leading up to the bridge serve well with 4m wide paths. You will need to bring your paths up along the top bridge side so the path does not interfere with the ride going through the tunnel, if you use it, hence the reason for the wooden steps to use as your path guide.

To lay your path correctly, start with the path on the bridge. Lay 7m path from end to end. When at end of bridge, reduce path to 4m and turn right or left to make your stairs downward. Once you have your 4m path layed on the downward stairs to one side, delete the 7m path section at the end of the bridge temporary and create a straight section at the top between the 2 stairs. Run 4m down the other stairs and down to ground, and back around making a loop from stair to stair. When you have your stair paths on both sides with the straight section in-between, you can go back and connect your 7m bridge path to the straight section between the stairs..

Please rate up if you like.