SHIFT-F4. Change the window to a Data View

SHIFT-F5. Change the window to a 3D Window

SHIFT-F6. Change the window to an IPO Window

SHIFT-F7. Change the window to a Buttons Window

SHIFT-F8. Change the window to a Sequence Window

SHIFT-F9. Change the window to an Outliner Window

SHIFT-F10. Change the window to an Image Window

SHIFT-F11. Change the window to a Text Window

SHIFT-F12. Change the window to an Action Window

The following HotKeys work uniformly in all Blender Windows,
if the Context allows:

CTRL-LMB. -Lasso select: drag the mouse to form a freehand selection area.


ESC.

• This key always cancels Blender functions without changes.
• or: FileWindow, DataView and ImageSelect: back to the
previous window type.
• or: the RenderWindow is pushed to the background (or
closed, that depends on the operating system).

SPACE. -Open the Toolbox.

TAB. -Start or quit EditMode.
F1. -Loads a Blender file. Changes the window to a FileWindow.

SHIFT-F1 -Appends parts from other files, or loads as Librarydata.
Changes the window to a FileWindow, making Blender
files accessible as a directory.

F2. -Writes a Blender file. Change the window to a FileWindow.

SHIFT-F2. -Exports the scene as a DXF file

CTRL-F2. -Exports the scene as a VRML1 file

F3. -Writes a picture (if a picture has been rendered). The fileformat is as indicated in the DisplayButtons. The window becomes a File Select Window.



CTRL-F3 -(ALT-CTRL-F3 on MacOSX). Saves a screendump of the active window. The fileformat is as indicated in the DisplayButtons. The window becomes a FileWindow.



SHIFT-CTRL-F3. -Saves a screendump of the whole Blender screen.

The fileformat is as indicated in the DisplayButtons. The window becomes a FileWindow.


F4. -Displays the Logic Context (if a ButtonsWindow is available).
available).

F5. -Displays the Shading Context (if a Buttons Window is available), Light, Material or World Sub-contextes depends on active object.



F6. -Displays the Shading Context and Texture Sub-context (if a ButtonsWindow is available).


F7. -Displays the Object Context (if a ButtonsWindow is available).


F8. -Displays the Shading Context and World Sub-context (if a ButtonsWindow is available).

F9. -Displays the Editing Context (if a ButtonsWindow is available).


F10. -Displays the Scene Context (if a ButtonsWindow is available).


F11. -Hides or shows the render window.

F12. -Starts the rendering from the active camera.
LEFTARROW. -Go to the previous frame.

SHIFT-LEFTARROW. -Go to the first frame.
RIGHTARROW. -Go to the next frame.
SHIFT-LEFTARROW. -Go to the last frame.
UPARROW. -Go forward 10 frames.
DOWNARROW. -Go back 10 frames.

ALT-A. -Change the current Blender window to Animation Playback mode. The cursor changes to a counter.


ALT-SHIFT-A. -The current window, plus all 3DWindows go into Animation Playback mode.

IKEY. -Insert Key menu. This menu differs from window to window.

JKEY. -Toggle the render buffers. Blender allows you to retain two different rendered pictures in memory.

CTRL-O. -Opens the last saved file.
QKEY. -OK? Quit Blender. This key closes Blender.

Blender quit is displayed in the console if Blender is
properly closed.

ALT-CTRL-T. TimerMenu. This menu offers access to
information about drawing speed. The results are displayed in a
pop-up.

CTRL-U. OK, Save User defaults. The current project
(windows, objects, etc.), including UserMenu settings are
written to the default file that will be loaded every time you start
Blender or set it to defaults by pressing CTRL-X.

CTRL-W. Write file. This key combination allows you to write
the Blender file without opening a FileWindow.

ALT-W. Write Videoscape file. Changes the window to a
FileWindow.

CTRL-X. Erase All. Everything (except the render buffer) is
erased and released. The default scene is reloaded.

CTRL-Y. Redo.

( Mac users may use CMD-Y. )

CTRL-Z. Undo.

( Mac users may use CMD-Z. )

SHIFT-CTRL-Z. Redo.

( Mac users may use SHIFT-CMD-Z )

These hotkeys are mainly bound to the 3D Viewport Window,
but many work on Objects in most other windows, like IPOs and
so on, hence they are summarized here.

HOME. All Objects in the visible layer are displayed
completely, centered in the window.

PAGEUP. Select the next Object Key.

NOTE:
If more than one Object
Key is selected, the selection is shifted up cyclically. Only works
if the AnimButtons->DrawKey is ON for the Object.

SHIFT-PAGEUP. Adds to selection the next Object Key.
PAGEDOWN. Select the previous Object Key.

NOTE:

If more than
one Object Key is selected, the selection is shifted up cyclically.

Only works if the AnimButtons->DrawKey is ON for the
Object.

SHIFT-PAGEDOWN. -Adds to selection the previous Object
Key.

ACCENT. (To the left of the 1KEY in US keyboard) - Select all
layers.

SHIFT-ACCENT. -Revert to the previous layer setting.

TAB. -Start/stop EditMode. -Alternative hotkey: ALT-E.

AKEY. - Selects/deselects all.

CTRL-A. - Apply size and rotation. - The rotation and dimensions
of the Object are assigned to the ObData (Mesh, Curve, etc.).

At first glance, it appears as if nothing has changed, but this
can have considerable consequences for animations or texture
mapping. This is best illustrated by also having the axis of a
Mesh Object be drawn (EditButtons->Axis). Rotate the Object
and activate Apply. The rotation and dimensions of the Object
are ‘erased’.

SHIFT-CTRL-A. If the active Object is automatically
duplicated (see AnimButtons->DupliFrames or AnimButtons-
>Dupliverts), a menu asks Make dupliʼs real?. This
option actually creates the Objects. If the active Mesh Object
is deformed by a Lattice, a menu asks Apply Lattice
deform?. Now the deformation of the Lattice is assigned to the
vertices of the Mesh.

SHIFT-A. - This is the AddMenu.

NOTE:

In fact, it is the ToolBox that
starts with the ‘ADD’ option. When Objects are added, Blender
starts EditMode immediately if possible.

BKEY. - Border Select.

Draw a rectangle with the LeftMouse;
all Objects within this area are selected, but not made active.
Draw a rectangle with the RightMouse to deselect Objects. In
orthonormal ViewMode, the dimensions of the rectangle are
displayed, expressed as global coordinates, as an extra feature in
the lower left corner. In Camera ViewMode, the dimensions that
are to be rendered according to the DisplayButtons are displayed
in pixel units.

SHIFT-B. -Render Border.

NOTE :

This only works in Camera
ViewMode. Draw a rectangle to render a smaller cut-out of the
standard window frame. If the option DisplayButtons->Border is
ON, a box is drawn with red and black lines.

CKEY. Centre View. The position of the 3DCursor becomes the
new centre of the 3DWindow.

ALT-C. - Convert Menu.


Depending on the active Object, a
PopupMenu is displayed. This enables you to convert certain
types of ObData. It only converts in one direction, everything
ultimately degrades to a Mesh! The options are:
• Font -> Curve
• MetaBall -> Mesh The original MetaBall remains
unchanged.
• Curve -> Mesh
• Surface -> Mesh
CTRL-C. Copy Menu. This menu copies information from the
active Object to (other) selected Objects.

• Fixed components are:
o Copy Loc: the X,Y,Z location of the Object.
If a Child is involved, this location is the
relative position in relation to the Parent.
o Copy Rot: the X,Y,Z rotation of the Object.
o Copy Size: the X,Y,Z dimension of the
Object.
o DrawType: copies Object Drawtype.
o TimeOffs: copies Object time offset.
o Dupli: all Duplicator data (Dupliframes,
Dupliverts and so on)
o Mass: Real time stuff.
o Damping: Real time stuff.
o Properties: Real time stuff.
o Logic Bricks: Real time stuff.
o Constraints: copies Object constraints.

• If applicable:
o Copy TexSpace: The texture space.
o Copy Particle Settings: the
complete particle system from the
AnimButtons.
• For Curve Objects:
o Copy Bevel Settings: all bevelling
data from the EditButtons.
• Font Objects:
o Copy Font Settings: font type,
dimensions, spacing.
o Copy Bevel Settings: all bevelling
data from the EditButtons.
• Camera Objects:
o Copy Lens: the lens value.

SHIFT-C. -CentreZero View.

The 3DCursor is set to zero
(0,0,0) and the view is changed so that all Objects, including the
3Dcursor, can be displayed. This is an alternative for HOME.

DKEY. - Draw mode menu. Allows to select draw modes exactly
as the corresponding menu in the 3D viewport header does.

SHIFT-D. Add Duplicate. The selected Objects are duplicated.
Grab mode starts immediately thereafter.

ALT-D. - Add Linked Duplicate. Of the selected Objects linked
duplicates are created. Grab mode starts immediately thereafter.

CTRL-D. -Draw the (texture) Image as wire. This option has a
limited function. It can only be used for 2D compositing.

ALT-E. - Start/stop EditMode. Alternative hotkey: TAB.

FKEY. - If selected Object is a mesh Toggles Face selectMode on
and off.

CTRL-F. - Sort Faces.

The faces of the active Mesh Object
are sorted, based on the current view in the 3DWindow. The
leftmost face first, the rightmost last. The sequence of faces is
important for the Build Effect (AnimButtons).

GKEY. -Grab Mode. Or: the translation mode.

NOTE:

This works on
selected Objects and vertices. Blender calculates the quantity
and direction of the translation, so that they correspond exactly
with the mouse movements, regardless of the ViewMode or
view direction of the 3DWindow. Alternatives for starting this
mode:

• LMB - to draw a straight line.

The following options are available in translation mode:

• Limiters:
o CTRL: in increments of 1 grid unit.
o SHIFT: fine movements.
o SHIFT-CTRL: in increments of 0.1 grid unit.


• MMB toggles: -A short click restricts the current
translation to the X,Y or Z axis. Blender calculates
which axis to use, depending on the already initiated
mouse movement. Click MiddleMouse again to return
to unlimited translation.

• XKEY, YKEY, ZKEY constrains movement to X, Y
or Z axis of the global reference.

• a second XKEY, YKEY, ZKEY constrains movement
to X, Y or Z axis of the local reference.

• a third XKEY, YKEY, ZKEY removes constraints.

• NKEY enters numerical input, as well as any numeric
key directly.

NOTE:

TAB will switch between values, ENTER
finalizes, ESC exits.


• Switching mode:
o GKEY: starts Grab mode again.
o SKEY: switches to Size (Scale) mode.
o RKEY: switches to Rotate mode.

ALT-G. -Clears translations, given in Grab mode. The X,Y,Z
locations of selected Objects are set to zero.

SHIFT-G. - Group Selection

• Children: Selects all selected Object’s Children.
• Immediate Children: Selects all selected Object’s
first level Children.
• Parent: Selects selected Object’s Parent.
• Shared Layers: Selects all Object on the same
Layer of active Object

IKEY. -Insert Object Key.

A keyposition is inserted in the current
frame of all selected Objects. A PopupMenu asks what key
position(s) must be added to the IpoCurves.
• Loc: The XYZ location of the Object.
• Rot: The XYZ rotation of the Object.
• Size: The XYZ dimensions of the Object
• LocRot: The XYZ location and XYZ rotation of the
Object.
• LocRotSize: The XYZ location, XYZ rotation and
XYZ dimensions of the Object.
• Layer: The layer of the Object.
• Avail: A position is only added to all the current
IpoCurves, that is curves which already exists.
• Mesh, Lattice, Curve or Surface: depending on
the type of Object, a VertexKey can be added

CTRL-J. - Join Objects.

NOTE:
All selected Objects of the same type are
added to the active Object. What actually happens here is that
the ObData blocks are combined and all the selected Objects
(except for the active one) are deleted. This is a rather complex
operation, which can lead to confusing results, particularly
when working with a lot of linked data, animation curves and
hierarchies.

KKEY. - Show Keys. The DrawKey option is turned ON for all
selected Objects. If all of them were already ON, they are all
turned OFF.

SHIFT-K. A PopupMenu asks: OK? Show and select
all keys. The DrawKey option is turned ON for all selected
Objects, and all Object-keys are selected. This function is used
to enable transformation of the entire animation system.

LKEY. - Makes selected Object local. Makes library linked
objects local for the current scene.

CTRL-L. - Link selected.

NOTE :

Links some of the Active Object data
to all selected Objects, the following menu entry appears only if
applicable.
• To Scene: Creates a link of the Object to a scene.
• Object IPOs: Links Active Object IPOs to selected
ones.
• Mesh Data: Links Active Object Mesh data selected
ones.
• Lamp Data: Links Active Object Lamp data to
selected ones.
• Curve Data: Links Active Object Curve data
selected ones.
• Surf Data: Links Active Object Surf data selected
ones.
• Material: Links Active Object Material to selected
ones.

SHIFT-L. - Select Linked. Selects all Objects somehow linked to
active Object.

• Object IPO: Selects all Object(s) sharing active
Object’s IPOs.
• Object Data: Selects all Object(s) sharing active
Object’s ObData.
• Current Material: Selects all Object(s) sharing
active Object’s current Material.
• Current Texture: Selects all Object(s) sharing
active Object’s current Texture.

MKEY. Moves selected Object(s) to another layer, a pop-up appers.

Use LMB to move,

use SHIFT-LMB to make the object belong to
multiple layers. If the selected Objects have different layers, this
is ʻORʼed in the menu display.

Use ESC to exit the menu. Press
the “OK” button or ENTER to change the layer seting.

NOTE :

The
hotkeys (ALT-)(1KEY, 2KEY, ... - 0KEY) work here as well
(see 3DHeader).

CTRL-M. Mirror Menu. It is possible to mirror an Object along
the X, Y or Z axis.

NKEY. Number Panel.

The location, rotation and scaling of the active
Object are displayed and can be modified.

ALT-O. Clear Origin. The ‘Origin’ is erased for all Child
Objects, which causes the Child Objects to move to the exact
location of the Parent Objects.

SHIFT-O. If the selected Object is a Mesh toggles SubSurf onn/
off. CTRL-1 to CTRL-4 switches to the relative SubSurf level
for display purpouses. Rendering SUbSurf level has no HotKey.
CTRL-P. Make selected Object(s) the child(ren) of the active
Object. If the Parent is a Curve then a popup offers two coiches:
• Normal Parent: Make a normal parent, the curve
can be made a path later on.
• Follow Path: Automatically creates a Follow Path
constraint with the curve as target.
If the Parent is an Armature, a popup offers three options:
• Use Bone: One of the Bones becomes the parent. The
Object will not be deformed. A popup permits to select
the bone. This is the option if you are modeling a robot
or machinery
• Use Armature: The whole armature is used as
parent for deformations. This is the choiche for organic
beings.
• Use Object: Standard parenting.
In the second case further options asks if Vertex groups
should not be created, should be created empty or created and
populated.

ALT-P. Clears Parent relation, user is asked if he wishes to keep
or clear parent-induced transforms.
• Clear Parent: the selected Child Objects are
unlinked from the Parent. since the transformation of
the Parent disappears, this can appear as if the former
Children themselves are transformed.
• ... and keep transform: the Child Objects
are unlinked from the Parent, and an attempt is made
to assign the current transformation, which was
determined in part by the Parent, to the (former Child)
Objects.
• Clear Parent inverse: The inverse matrix of
the Parent of the selected Objects is erased. The Child
Objects remain linked to the Objects. This gives the
user complete control over the hierarchy.

RKEY. Rotate mode. Works on selected Object(s). In Blender,
a rotation is by default a rotation perpendicular to the screen,
regardless of the view direction or ViewMode. The degree of
rotation is exactly linked to the mouse movement. Try moving
around the rotation midpoint with the mouse. The rotation pivot
point is determined by the state of the 3DWiewport Header
buttons. Alternatives for starting this mode:
• LMB to draw a C-shaped curve.
The following options are available in rotation mode:
• Limiters:
o CTRL: in increments of 5 degrees.
o SHIFT: fine movements.
o SHIFT-CTRL: in increments of 1 degree.
• MMB toggles: A short click restricts the current
rotation to the horizontal or vertical view axis.
• XKEY, YKEY, ZKEY constrains rotation to X, Y or Z
axis of the global reference.
• a second XKEY, YKEY, ZKEY constrains rotation to
X, Y or Z axis of the local reference.
• a third XKEY, YKEY, ZKEY removes constraints.
• NKEY enters numerical input, as well as any numeric
key directly. ENTER finalizes, ESC exits.
• ARROWS:These keys can be used to move the mouse
cursor exactly 1 pixel.
• Roration can be terminated with:
o LMB SPACE or ENTER: move to a new
position.
o RMB or ESC: everything goes back to the old
position.
• Switching mode:
o GKEY: switches to Grab.
o SKEY: switches to Size (Scale) mode.
o RKEY: starts Rotate mode again.

ALT-R. Clears Rotation.

NOTE:
The X,Y,Z rotations of selected Objects
are set to zero.

SKEY. Size mode or scaling mode.

Works on selected Object(s).
The degree of scaling is exactly linked to the mouse movement.
Try to move from the (rotation) midpoint with the mouse. The
pivot point is determined by the settings of the 3D Viewport
header pivot Menu. Alternatives for starting scaling mode:
• LMB to draw a V-shaped line.
The following options are available in scaling mode:

• Limiters:
o CTRL: in increments of 0.1.
o SHIFT-CTRL: in increments of 0.01.

• MMB toggles: A short click restricts the scaling to X, Y
or Z axis. Blender calculates the appropriate axis based
on the already initiated mouse movement. Click MMB
again to return to free scaling.

• XKEY, YKEY, ZKEY constrains scaling to X, Y or Z
axis of the local reference.

• a second XKEY, YKEY, ZKEY removes constraints.

• NKEY enters numerical input, as well as any numeric
key directly. ENTER finalizes, ESC exits.

• ARROWS:These keys can be used to move the mouse
cursor exactly 1 pixel.

• Scaling can be terminated with:
o LMB SPACE or ENTER: move to a new
position.
o RMB or ESC: everything goes back to the
old dimension.
• Switching mode:
o GKEY: switches to Grab.
o SKEY: starts Size mode again.
o RKEY: switches to Rotation.

ALT-S. Clears Size.

NOTE:

The X,Y,Z dimensions of selected Objects
are set to 1.0.

SHIFT-S. SnapMenu:

• Sel->Grid: Moves Object to nearest grid point.

• Sel->Curs: Moves Object to cursor.

• Curs->Grid: Moves cursor to nearest grid point.

• Curs->Sel: Moves cursor to selected Object(s).

• Sel->Center: Moves Objects to their barycentrum.

TKEY. Texture space mode.

NOTE:

The position and dimensions of
the texture space for the selected Objects can be changed in the
same manner as described above for Grab and Size mode. To
make this visible, the drawingflag EditButtons->TexSpace is set
ON. A PopupMenu asks you to select: “Grabber” or “Size”.

CTRL-T. Makes selected Object(s) track the Active Object.

Old track method was Blender default tracking before version
2.30. The new method is the Constrain Track, this creates a fully
editable constraint on the selected object targeting the active
Object.

ALT-T. Clears old style Track.

NOTE :

Constraint track is removed as all
constrains are.

UKEY. Makes Object Single User, the inverse operation of Link

(CTRL-L) a pop-up appears with choices.

• Object: if other Scenes also have a link to this
Object, the link is deleted and the Object is copied. The
Object now only exists in the current Scene. The links
from the Object remain unchanged.

• Object & ObData: Similar to the previous
command, but now the ObData blocks with multiple
links are copied as well. All selected Objects are now
present in the current Scene only, and each has a unique
ObData (Mesh, Curve, etc.).

• Object & ObData & Materials+Tex:
Similar to the previous command, but now Materials
and Textures with multiple links are also copied. All
selected Objects are now unique. They have unique
ObData and each has a unique Material and Texture
block.

• Materials+Tex: Only the Materials and Textures
with multiple links are copied.

VKEY. Switches in/out of Vertex Paint Mode.

ALT-V. Object-Image Aspect.

NOTE:

This hotkey sets the X and Y
dimensions of the selected Objects in relation to the dimensions
of the Image Texture they have. Use this hotkey when making
2D Image compositions and multi-plane designs to quickly place
the Objects in the appropriate relationship with one another.

WKEY. Opens Object Booleans Menu.

XKEY. Erase Selected? Deletes selected objects.

ZKEY. Toggles Solid Mode on/off.

SHIFT-Z. Toggles Shaded Mode on/off.

ALT-Z. Toggles Textured Mode on/off.

Again, Most of these hotkeys are usefull in the 3D Viewport
when in Edit Mode, but many works on other Blender Object, so
they are summarized here.
Many Object Mode keys works in Edit mode too, but on the
selected vertices or control points; among these Grab, Rotate,
Scale and so on. These hotkeys are not repeated here.

TAB or ALT-E. This button starts and stops Edit Mode.

CTRL-TAB. Switches between Vertex Select, Edge Select, and
Face Select modes.

NOTE:

Holding SHIFT while clicking on a mode
will allow you to combine modes.

AKEY. Select/Unselect all.

BKEY-BKEY. Circle Select.

NOTE:

If you press BKEY a second time
after starting Border Select, Circle Select is invoked. It works
as described above. Use NUM+ or NUM- or MW to adjust the
circle size. Leave Circle Select with RMB or ESC.

CTRL-H. With vertices selected, this creates a “Hook” object.
Once a hook is selected, CTRL-H brings up an options menu for
it.

NKEY. Number Panel.

NOTE:

Simpler than the Object Mode one, in
Edit Mode works for Mesh, Curve, Surface: The location of the
active vertex is displayed.

OKEY. Switch in/out of Proportional Editing.

SHIFT-O. Toggles between Smooth and Sharp Proportional
Editing.

PKEY. SeParate.

NOTE:

You can choose to make a new object with
all selected vertices, edges, faces and curves or create a new
object from each separate group of interconnected vertices from
a popup. Note that for curves you cannot separate connected
control vertices. This operation is the opposite of Join (CTRLJ).

CTRL-P. Make Vertex Parent.

NOTE:

If one object (or more
than one) is/are selected and the active Object is in Edit Mode
with 1 or 3 vertices selected then the Object in Edit Mode
becomes the Vertex Parent of the selected Object(s). If only 1
vertex is selected, only the location of this vertex determines
the Parent transformation; the rotation and dimensions of the
Parent do not play a role here. If three vertices are selected, it is
a ‘normal’ Parent relationship in which the 3 vertices determine
the rotation and location of the Child together. This method
produces interesting effects with Vertex Keys. In EditMode,
other Objects can be selected with CTRL-RMB.

CTRL-S. Shear.

NOTE:

In EditMode this operation enables you to make
selected forms ‘slant’. This always works via the horizontal
screen axis.

UKEY. Undo.

NOTE:

When starting Edit Mode, the original ObData
block is saved and can be returned to via UKEY. Mesh Objects
have better Undo, see next section.

WKEY. Specials PopupMenu.

A number of tools are included
in this PopupMenu as an alternative to the Edit Buttons. This
makes the buttons accessible as shortcuts, e.g. EditButtons-
>Subdivide is also ‘WKEY, 1KEY’.

SHIFT-W. Warp.

NOTE:

Selected vertices can be bent into curves with
this option. It can be used to convert a plane into a tube or even
a sphere. The centre of the circle is the 3DCursor. The mid-line
of the circle is determined by the horizontal dimensions of the
selected vertices. When you start, everything is already bent 90
degrees. Moving the mouse up or down increases or decreases
the extent to which warping is done. By zooming in/out of the
3Dwindow, you can specify the maximum degree of warping.
The CTRL limiter increments warping in steps of 5 degrees.

This section and the following highlight peculiar EditMode
Hotkeys.

CTRL-NUM+. Adds to selection all vertices connected by an
edge to an already selected vertex.
CTRL-NUM-. Removes from selection all vertices of the outer
ring of selected vertices.

ALT-CTRL-RMB. Edge select.

CKEY. If using curve deformations, this toggles the curve
Cyclic mode on/off.

EKEY. Extrude Selected.

NOTE:

“Extrude” in EditMode transforms all
the selected edges to faces. If possible, the selected faces are also
duplicated. Grab mode is started directly after this command is
executed.

SHIFT-EKEY. Crease Subsurf edge.

NOTE:

With “Draw Creases”
enabled, pressing this key will allow you to set the crease
weight. Black edges have no weight, edge-select color have full
weight.

CTRL-EKEY. Mark LSCM Seam.

NOTE:

Marks a selected edge as a
“seam” for unwrapping using the LSCM mode.

FKEY. Make Edge/Face.

NOTE :

If 2 vertices are selected, an edge is
created. If 3 or 4 vertices are selected, a face is created.

SHIFT-F. Fill selected.

NOTE:

All selected vertices that are bound by
edges and form a closed polygon are filled with triangular faces.
Holes are automatically taken into account. This operation is 2D;
various layers of polygons must be filled in succession.

ALT-F. Beauty Fill.

NOTE:

The edges of all the selected triangular faces
are switched in such a way that equally sized faces are formed.
This operation is 2D; various layers of polygons must be filled in
succession. The Beauty Fill can be performed immediately after
a Fill.

CTRL-F. Flip faces, selected triangular faces are paired and
common edge of each pair swapped.

HKEY. Hide Selected.

NOTE:

All selected vertices and faces are
temporarily hidden.

SHIFT-H. Hide Not Selected: All non-selected vertices and
faces are temporarily hidden.

ALT-H. Reveal.

NOTE:

All temporarily hidden vertices and faces are
drawn again.

ALT-J. Join faces, selected triangular faces are joined in pairs
and transformed to quads

KKEY. Knife tool Menu.
• Face Loop Select: (SHIFT-R) Face loops are
highlighted starting from edge under mouse pointer.

LMB finalizes, ESC exits.
• Face Loop Cut: (CTRL-R) Face loops are
highlighted starting from edge under mouse pointer.

LMB finalizes, ESC exits.
• Knife (exact): (SHIFT-K) Mouse starts draw
mode. Selected Edges are cut at intersections with
mouse line. ENTER or RMB finalizes, ESC exits.
• Knife (midpoints): (SHIFT-K) Mouse starts
draw mode. Selected Edges intersecting with mouse
line are cut in middle regardless of true intersection
point. ENTER or RMB finalizes, ESC exits.

LKEY. Select Linked.

NOTE:

If you start with an unselected vertex
near the mouse cursor, this vertex is selected, together with all
vertices that share an edge with it.
SHIFT-L. Deselect Linked. If you start with a selected vertex,
this vertex is deselected, together with all vertices that share an
edge with it.

CTRL-L. Select Linked Selected.

NOTE:

Starting with all selected vertices, all vertices connected to them are selected too.


MKEY. Mirror.

NOTE:

Opens a popup asking for the axis to mirror. 3
possible axis group are available, each of which contains three
axes, for a total of nine choices. Axes can be Global (Blender
Global Reference); Local (Current Object Local Reference) or
View (Current View reference). Remember that mirroring, like
scaling, happens with respect to the current pivot point.

ALT-M. Merges selected vertices at barycentrum or at cursor
depending on selection made on pop-up.

CTRL-N. Calculate Normals Outside.

NOTE:

All normals from selected faces are recalculated and consistently set in the same direction.
An attempt is made to direct all normals ‘outward’.


SHIFT-CTRL-N. Calculate Normals Inside.

NOTE:

All normals from selected faces are recalculated and consistently set in the same
direction. An attempt is made to direct all normals ‘inward’.


ALT-S. Whereas SHIFT-S scales in Edit Mode as it does in
Object Mode, for Edit Mode a further option exists, ALT-S
moves each vertex in the direction of its local normal, hence
effectively shrinking/fattening the mesh.

CTRL-T. Make Triangles.

NOTE:

All selected faces are converted to
triangles.

UKEY. Undo.

NOTE:

When starting Edit Mode, the original ObData
block is saved and all subsequent changes are saved on a stack.
This option enables you to restore the previous situation, one
after the other.

SHIFT-U. Redo. This let you re-apply any undone changes up to
the moment in which Edit Mode was entered

ALT-U. Undo Menu. This let you choose the exact point to
which you want to undo changes.

WKEY. Special Menu. A PopupMenu offers the following
options:
• Subdivide: all selected edges are split in two.
• Subdivide Fractal: all selected edges are split in
two and middle vertex displaced randomly.
• Subdivide Smooth: all selected edges are split in
two and middle vertex displaced along the normal.
• Merge: as ALT-M.
• Remove Doubles: All selected vertices closer to
each other than a given threshold (See EditMode Button
Window) are merged ALT-M.
• Hide: as HKEY.
• Reveal: as ALT-H.
• Select Swap: Selected vertices become unselected
and vice versa.
• Flip Normals: Normals of selected faces are
flipped.
• Smooth: Vertices are moved closer one to each other,
getting a smoother object.
• Bevel: Faces are reduced in size and the space
between edges is filled with a smoothly curving bevel
of the desired order.

XKEY. Erase Selected. A PopupMenu offers the following
options:
• Vertices: all vertices are deleted. This includes the
edges and faces they form.
• Edges: all edges with both vertices selected are
deleted. If this ‘releases’ certain vertices, they are
deleted as well. Faces that can no longer exist as a
result of this action are also deleted.
• Faces: all faces with all their vertices selected are
deleted. If any vertices are ‘released’ as a result of this
action, they are deleted.
• All: everything is deleted.
• Edges and Faces: all selected edges and faces are
deleted, but the vertices remain.
• Only Faces: all selected faces are deleted, but the
edges and vertices remain.

YKEY. Split. This command ʻsplitsʼ the selected part of a Mesh
without deleting faces. The split parts are no longer bound by
edges. Use this command to control smoothing. Since the split
parts have vertices at the same position, selection with LKEY is
recommended.

CKEY. Set the selected curves to cyclic or turn cyclic off.

NOTE:

An individual curve is selected if at least one of the vertices is
selected.


EKEY. Extrude Curve.

NOTE:

A vertex is added to the selected end of the curves. Grab mode is started immediately after this command is executed.



FKEY. Add segment.

NOTE:

A segment is added between two selected vertices at the end of two curves. These two curves are combined into one curve.

HKEY. Toggle Handle align/free.

NOTE:

Toggles the selected Bezier handles between free or aligned.

SHIFT-H. Set Handle auto.

NOTE:

The selected Bezier handles are converted to auto type.

CTRL-H. Calculate Handles.

NOTE:

The selected Bezier curves are calculated and all handles are assigned a type.

LKEY. Select Linked.

NOTE:

If you start with an non-selected vertex near the mouse cursor, this vertex is selected together with all the vertices of the same curve.

SHIFT-L. Deselect Linked.

NOTE:

If you start with a selected vertex, it is deselected together with all the vertices of the same curve.

MKEY. Mirror.

NOTE:

Mirror selected control points exactly as for vertices in a Mesh.

TKEY. Tilt mode. Specify an extra axis rotation, i.e. the tilt, for
each vertex in a 3D curve.

ALT-T. [/b[u]]Clear Tilt.[/u] Set all axis rotations of the selected vertices
to zero.

VKEY. Vector Handle.

NOTE:

The selected Bezier handles are
converted to vector type.

WKEY. The special menu for curves appears:
• Subdivide. Subdivide the selected vertices.
• Switch direction. The direction of the selected curves
is reversed. This is mainly for Curves that are used as
paths!

XKEY. Erase Selected. A PopupMenu offers the following
options:
• Selected: all selected vertices are deleted.
• Segment: a curve segment is deleted. This only works
for single segments. Curves can be split in two using
this option. Or use this option to specify the cyclic
position within a cyclic curve.
• All: delete everything.

MKEY -Mirror. Mirror selected control points exactly as for
vertices in a Mesh.

EditMode - Surface

CKEY. -Toggle Cyclic menu.
NOTE:
A PopupMenu asks if selected
surfaces in the ‘U’ or the ‘V’ direction must be cyclic. If they
were already cyclic, this mode is turned off.

EKEY. -Extrude Selected.
NOTE:
This makes surfaces of all the selected
curves, if possible. Only the edges of surfaces or loose curves are
candidates for this operation. Grab mode is started immediately
after this command is completed.

FKEY. -Add segment.
NOTE:
A segment is added between two selected
vertices at the ends of two curves. These two curves are
combined into 1 curve.

LKEY. -Select Linked.
NOTE:
If you start with an non-selected vertex
near the mouse cursor, this vertex is selected together with all
the vertices of the same curve or surface.

SHIFT-L. -Deselect Linked.
NOTE:
If you start with a selected vertex,
this vertex is deselected together with all vertices of the same
curve or surface.

MKEY. -Mirror.
NOTE:
Mirror selected control points exactly as for
vertices in a Mesh.

SHIFT-R. -Select Row.
NOTE:
Starting with the last selected vertex, a
complete row of vertices is selected in the ‘U’ or ‘V’ direction.
Selecting Select Row a second time with the same vertex
switches the ‘U’ or ‘V’ selection.

WKEY. -The special menu for surfaces appears:
• Subdivide. Subdivide the selected vertices
• Switch direction. This will switch the normals of the
selected parts.
• Mirror. Mirrors the selected vertices

XKEY. -Erase Selected.
NOTE:
A PopupMenu offers the following
choices:
• Selected: all selected vertices are deleted.
• All: delete everything.

MKEY. -Mirror.

NOTE:
Mirror selected control points exactly as for vertices in a Mesh

In Text Edit Mode most hotkeys are disabled, to allow text
entering.

RIGHTARROW. -Move text cursor 1 position forward

SHIFT-RIGHTARROW. -Move text cursor to the end of the
line.

LEFTARROW. -Move text cursor 1 position backwards.

SHIFT-LEFTARROW. -Move text cursor to the start of the line

DOWNARROW. -Move text cursor 1 line forward
SHIFT-DOWNARROW. -Move text cursor to the end of the
text.

UPARROW. -Move text cursor 1 line back.

SHIFT-UPARROW. -Move text cursor to the beginning of the text


ALT-U. -Reload Original Data (undo).

NOTE:
When EditMode is started, the original text is saved. You can restore this original
text with this option.


ALT-V. -Paste text.

The text file /tmp/.cutbuffer is inserted
at the cursor location.

SHIFT-K. -All vertex colours are erased; they are changed to the
current drawing colour.

UKEY. -Undo.

NOTE:
This undo is ‘real’. Pressing Undo twice redoes the undone.


WKEY. -Shared Vertexcol: The colours of all faces that
share vertices are blended.

EKEY. LSCM -Unwrapping.

Launches LSCM unwrapping on the faces visible in the UV editor.


PKEY. -Pin selected vertices.
NOTE:
Pinned vertices will stay in place on the UV editor when executing an LSCM unwrap.

ALT-PKEY. -Un-Pin selected vertices.
NOTE:
Pinned vertices will stay in place on the UV editor when executing an LSCM unwrap.

ALT-CLICK. - Selects a Face Loop.

TAB. -Switches to EditMode, selections made here will show up when switching back to FaceSelectMode with TAB.

FKEY. -With multiple, co-planar faces selected, this key will merge them into one “FGon” so long as they remain co-planar (flat to each other).

LKEY. -Select Linked UVs. To ease selection of face groups,Select Linked in UV Face Select Mode will now select all linked faces, if no seam divides them.

RKEY. -Calls a menu allowing to rotate the UV coordinates or the VertexCol.

UKEY. -Calls the UV Calculation menu.

NOTE:

The following modes can the applied to the selected faces:

• Cube: Cubical mapping, a number button asks for the cubemap size

• Cylinder: Cylindrical mapping, calculated from the center of the selected faces

• Sphere: Spherical mapping, calculated from the center of the selected faces

• Bounds to x: UV coordinates are calculated from the actual view, then scaled to a boundbox of 64 or 128 pixels in square

• Standard x: Each face gets default square UV coordinates

• From Window: The UV coordinates are calculated using the projection as displayed in the 3DWindow