Today we’re pushing another update live to address the issues listed below. Special thanks to the community for contributions to bug reporting and evidence gathering.

• Fixed an issue which prevented the Cloud Notes app from accepting mouse inputs after the 29th line.
  
• Improved the clarity of GPU minimum requirements listed in Will It Run for League of Legends.
  
• Corrected issues with phone behavior when in assembly mode in the Esports Expansion DLC.

• Fixed an issue which caused the be quiet! Dark Rock TF 2 cooler to clip with case fans in NZXT H210i case.
  
• Reduced the number of instances causing cable clipping inside the InWin 303-MSI Dragon Edition case.
  
• Adjusted collision to prevent AIO and custom radiators from clipping with the drive bays in the NZXT H170i case.
  
• Increased the number of compatible AIO cooler and motherboard combinations in the CORSAIR iCUE 5000X RGB case.
  
• There will no longer be two instances of the Corsair Vengeance LPX (Red) 32 GB 3600 Mhz memory in the shop.
  
• Fixed an issue causing conflicts between case fans and other components inside the be quiet! Pure Base 500DX case.
  
• Adjusted the pathing of the 24 pin cable to prevent clipping with the NZXT H510 Elite case.
  
• Improved collision of M.2 storage units to prevent several clipping issues with Fractal Design Node 202 case.
  
• Improved fan cable pathing in the SilverStone PS14 case to reduce clipping with large coolers.
  
• Players can now correctly install USB devices on the ASUS ROG Strix X570-I Gaming motherboard if a be quiet! Dark Rock TF2 cooler is present.
  
• Adjusted bottom panel alignment in the Lian Li O11D XL-S case.
  
• Improved the performance of the ARCTIC Freezer 34 eSports DUO CPU cooler.
  
• Side panel screws will now correctly tighten all the way on the CORSAIR iCUE 5000D series case.
  
• Colorful iGame GeForce RTX 2080 Ti Vulcan X OC GPU no longer presents wobbly fan behavior.
  
• Fixed a number of collision issues with the Raijintek NYX PRO case.
  
• Reduced the number of clipping issues when using an SLI bridge in the Raijintek NYX PRO case.
  
• Fixed a number of collision issues with the EVGA SuperNOVA 1600 T2.
  
• Adjusted cable routing to reduce instances of GPU clipping in the MSI MPG Sekira 500P case.
  
• Adjusted cable routing to prevent EVGA Z270 FTW K's 24 pin cable clipping through Corsair Carbide Series 275R's case side panel.
  
• HDMI cables will no longer clip through the Fractal Design Define R6 case.
  
• Improved CPU handle texture on the ASRock B550 Pro4 motherboard.
  
• Improved the collision of the back panel of the EVGA DG-77 case.
  
• Significantly reduced the instances of clipping between 280mm AIO coolers and the ADATA XPG Defender Pro case.
  
• Adjusted the pathing of the 8-pin cable to prevent clipping with the heatsinks of the ASRock TRX40 Taichi motherboard inside the Raijintek PAEAN case.
  
• Players will no longer be able to install the PSU Shroud of the Raijintek NYX PRO case when the power cables are connected to the PSU.
  
• Fixed an issue which caused clipping between the Raijintek CALORE C240D cooler and ASRock Z390M Pro4 motherboard while inside the Raijintek PAEAN M case.
  
• The Colorful CVN B365M GAMING PRO V20 motherboard now correctly allows players to connect radiators when installed inside the Raijintek PAEAN M case.
  
• Significantly reduced the instances of clipping inside the CORSAIR Crystal Series 570X RGB case.
  
• Fixed an issue which disabled lighting in the CORSAIR Carbide Series 275R case when turning workshop lights are turned off.
  
• Large mouse pads will no longer clip with aftermarket keyboards.

• Fixed an issue which caused the Skip Day button to be ignored when using a controller in the Esports DLC and IT Expansion.
  
• Fixed an issue which caused the ‘Menu’ key bind icon to be displayed twice in the key bindings sub-menu when using a controller.
  
• Fixed an issue which prevented players from accessing the peripherals search bar while using a controller.
  
• Fixed an issue which caused the shop search bar to automatically search after the first letter was input when using a controller.
  
• Fixed an issue which prevented controller prompts from correctly showing when opening the Change Workshop sub-menu.
  
• The warning hint showing that ‘Piping is locked’ will now display more accurately.
  
• Players using a controller can now correctly quit from the calendar.
  
• Camera rotation input will now be accepted whilst the player is scrolling a checklist.

• Players should now be able to reinstall the AIO cooler after diagnosing and fixing the PC from the "L.Field@FieldRodents.net - NEED FIX" job.
  
• Reduced the number of conflicting parts generated by PCs through the random job generator.

• Fixed an issue which caused a low-resolution texture to be present on some walls in the first Esports Expansion DLC workshop.
  
• Fixed an issue which caused a low-resolution texture to be present on some walls in the second Esports Expansion DLC workshop.
  
• Fixed an issue which caused low quality shadows inside the third IT Expansion workshop.
  
• Go to PC will no longer send the player to the wrong spot in the fifth IT Expansion workshop.
  
• Adjusted power cables to prevent them clipping through the workbenches in the third IT Expansion workshop.
  
• The front desk PC's power cable will now correctly connect to the PC in the third IT Expansion workshop.
  
• Removed duplicate extension plugs in the offsite job for “Hiram.Young@irra.tech”.

Join us on all our official platforms today: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

Today we're pushing a minor update live to address the issues listed below. Special thanks to the community for contributions to bug reporting and evidence gathering.

• Fixed an issue which prevented several 360mm AIO coolers from being installed inside the CORSAIR iCUE 5000D Airflow case when used with an ASUS ROG Strix B550-F Gaming Wifi motherboard.
  
• Corsair iCUE 5000 cases should now correctly fit custom water loop reservoirs when a radiator is installed above the reservoir slot
  
• Fixed an issue which caused Corsair iCUE 5000 cases to incorrectly detect collision when installing a custom water-cooling radiator if a reservoir is already installed.
  
• Adjusted pathing to prevent clipping issues with 4 pin cables in the Corsair iCUE 5000X RGB, 5000D and 5000D Airflow cases

Join us on all our official platforms today: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

Hello PC Builders!

As we enter another action-packed month, we’re kicking things off with a major update - v1.15. This time around we’re growing the entire parts range with a variety of fan favourites, extra small form factor options, a mix of often requested white parts, and one more venue to build it all in.
First though, we sailed the high seas looking for computing’s finest privateers and returned with one of their newest treasure chests.

In a PC Building Simulator first, we’ve teamed up with CORSAIR to celebrate the release of their new iCUE 5000T case. Continuing the 5000 series case range first shown during CES2021, we’re excited to unveil the latest entries’ digital counterpart to closely coincide with the physical release.

In Irratech’s latest effort to increase PC building productivity, the head honcho, el numero uno, mr big, godfather, and lord of the rings is venturing into uncharted territory. By orders from the top, we’re giving all players access to the brand-new Irratech open-plan productivity suite (IOPS) office ready for all your first quarter chart boosting constructions.

Filled with as much personality as a person can reasonably fit into each two-metre-wide regulation table and unused notice board, let this be the office arcade machine to your problems. Now usable in free build or career mode. *

*Pictures of loved ones not included.

Colorful CVN X570 GAMING PRO V14

SilverStone PF360W-ARGB

• Colorful CVN X570 GAMING PRO V14

• CORSAIR iCUE 5000T
  
• CORSAIR iCUE 5000X RGB

• CORSAIR iCUE SP 120 RGB Elite
  
• SILVERSTONE Air Blazer 120R
  
• SILVERSTONE Air Blazer 120RW

• ARCTIC Alpine 23 CO
  
• ARCTIC Alpine 23
  
• ARCTIC Freezer 34 eSports DUO
  
• ARCTIC Freezer Xtreme
  
• be quiet! Dark Rock TF 2
  
• COOLER MASTER HYPER 212 EVO V2
  
• COOLER MASTER HYPER 212 BLACK
  
• COOLER MASTER HYPER 212 RGB BLACK EDITION

• Alphacool Eisbaer 420 CPU
  
• Alphacool Eisbaer Aurora 240 CPU
  
• Alphacool Eisbaer Aurora 420 CPU
  
• Alphacool Eisbaer Aurora 360 CPU
  
• Alphacool Eisbaer Aurora 280 CPU
  
• EVGA CLC 360mm All-In-One RGB LED CPU Liquid Cooler
  
• SilverStone PF240W-ARGB
  
• SilverStone PF360W-ARGB
  
• Thermaltake TH240 ARGB Sync AIO Liquid Cooler
  
• Thermaltake TH240 ARGB Sync Snow Edition AIO Liquid Cooler
  
• Thermaltake TH360 ARGB Sync Snow Edition AIO Liquid Cooler

• ZOTAC GAMING GeForce RTX 3060 Twin Edge OC
  
• ZOTAC GAMING GeForce RTX 3060 AMP White Edition
  
• ZOTAC GAMING GeForce RTX 3070 AMP Holo
  
• ZOTAC GAMING GeForce RTX 3080 Trinity

• CORSAIR DOMINATOR® PLATINUM RGB 8GB DDR4 DRAM
  
• CORSAIR DOMINATOR® PLATINUM RGB 16GB DDR4 DRAM
  
• CORSAIR VENGEANCE® LPX DDR4 DRAM
  
• G.SKILL Trident Z Royal Elite DDR4
  
• Patriot VIPER STEEL RGB
  
• TEAM GROUP XCALIBUR RGB DDR4 4000MHz
  
• TEAM GROUP XCALIBUR RGB DDR4 3600MHz
  
• TEAM GROUP XCALIBUR RGB DDR4 3200MHz

• Colorful SL500
  
• Patriot VIPER VP4300

• COOLER MASTER V850 SFX Gold
  
• COOLER MASTER V750 SFX Gold
  
• COOLER MASTER V650 SFX Gold
  
• COOLER MASTER V550 SFX Gold
  
• COOLER MASTER V1300 Platinum
  
• COOLER MASTER V850 Gold V2
  
• COOLER MASTER V750 Gold V2
  
• COOLER MASTER V650 Gold V2
  
• COOLER MASTER V550 Gold V2
  
• COOLER MASTER V850 Gold V2 White Edition
  
• COOLER MASTER V750 Gold V2 White Edition
  
• COOLER MASTER V650 Gold V2 White Edition
  
• COOLER MASTER V550 Gold V2 White Edition
  
• SILVERSTONE NJ700

• Patriot VIPER V570 RGB MMO+FPS LASER GAMING MOUSE
  
• Patriot VIPER V765 RGB MECHANICAL GAMING KEYBOARD

• Fixed an issue which caused the cursor to disappear when the user attempts to edit or use a PC while in windowed mode.
  
• Fixed an issue which could lead to save file corruption if the user has a large number of saves.
  
• The UI will now correctly align icons when starting a new career mode game.
  
• Fixed an issue which caused controller inputs to disappear after accessing the End Day Menu a second time.
  
• Adjusted filtering criteria for CPU Coolers to work as intended.
  
• Adjusted UI elements to work in ultrawide resolutions during the IT expansion, specifically tested to 5120x1440.
  
• Fixed an issue which caused the red cable highlight to remain floating when pressing the power key and hovering over the CPU with the Cooler selected at the same time.
  
• Fixed an issue where users can see floating motherboard standoffs while looking at a PC monitor.
  
• Fixed an issue which led to save file corruption when switching workshops.
  
• The background of the calendar will no longer self-illuminate.

• CPU coolers, AIO coolers and CPU blocks can no longer be installed while the CPU shield of the MSI MPG Z590 CARBON EK X motherboard is open.
  
• Adjusted the routing of 24-pin cable to prevent clipping through the side panel of the CORSAIR Carbide Series 275R case.
  
• Corrected the placement of PSUs inside the be quiet! Pure Base 500DX case.
  
• Adjusted the AMD Radeon RX 5700 to match its real-world counterpart more closely.
  
• Fixed an issue which caused the header of case fan cables to clip through the EVGA Z270 FTW K motherboard.
  
• Adjusted the routing of 24-pin cable to appear more natural on the EVGA Z270 FTW K motherboard.
  
• The ASUS TUF Z370-PLUS GAMING motherboard will no longer allow two 4 pin cables to connect into the same slot.
  
• Prevented the PSU mount of the be quiet! Silent Base 500 case from being installed if the PSU is already plugged in.
  
• Reduced the number of instances which could cause clipping with the ASUS TUF Z370-PLUS GAMING motherboard.
  
• Reduced the number of instances which would cause cooler cables to clip through RAM in EVGA DG-86 and EVGA DG-87 Full Tower cases.
  
• USB devices will now correctly align with USB ports on the Fractal Design Node 202 case.
  
• Adjusted the Raijintek Asterion Plus case collision to reduce clipping with AIO coolers.
  
• Changed the pathing of motherboard 24-pin cable in the NZXT S340 case to prevent them clipping with the side panel.
  
• Team Group ZEUS DDR4 GAMING RAM now correctly features the heat spreader on both sides.
  
• Fixed the collision of the ASUS TUF X299 MARK 1 M.2 Drive Bay.
  
• Changed the pathing of the motherboard 24-pin cable in the GamerStorm Genome ROG Certified Edition case to prevent clipping with the side panel.
  
• Changed the pathing of the PSU cables inside the be quiet! Pure Base 500 case to prevent them clipping with the PSU.
  
• Reduced the number of instances which could lead to cables clipping through GPUs inside the EVGA D-85 Full Tower Case.
  
• Changed the pathing of motherboard 24-pin cable in the ADATA XPG Defender Pro case to prevent clipping with drive bays.
  
• M.2 storage units can no longer be teleported through an installed GPU on the GIGABYTE GA-AB350-Gaming 3 motherboard, another victory for science.
  
• Increased the AIO compatibility of the Lian Li O11-D XL-X case.
  
• Corrected the length of the EVGA SuperNOVA 1200 P2 PSU.
  
• Adjusted PSU support of the Raijintek ENYO case to prevent clipping with the EVGA Supernova 1600 T2 PSU.
  
• Adjusted the routing of 24-pin cable in the be quiet! Silent Base 600 Window (Orange) case to prevent clipping with the side panel.
  
• Significantly reduce the number of clipping issues with the Cooler Master MasterCase Maker 5t case.
  
• GPU power cables will no longer clip through the ASUS ROG Strix GeForce GTX 1070 OC Edition.
  
• GPU power cables will no longer clip through the GTX 980 Ti GAMING 6G.
  
• Adjusted the power button cable to prevent clipping with PSU inside be quiet! Silent Base 600 Window (Orange) case.
  
• Reduced the number of instances causing clipping with the ASUS ROG SWIFT PG 279QE monitor across workshops.
  
• Adjusted the routing of fan cables to prevent clipping with RAM while using the Mortoni H170 Mtech plus motherboard.
  
• Fixed cable routing to prevent case fan and 24-pin connector cables clipping in the NZXT S340 - Designed by Razer case.
  
• Fixed cable routing to prevent case fan and 24-pin connector cables clipping in the Deepcool EARLKASE RGB WH case.
  
• Revisited cable routing setup in the Cooler Master Silencio S600 case to reduce clipping and make it appear more natural.
  
• Changed the pathing of the Cooler Master MasterAir Pro 4 cable to prevent it clipping through RAM.
  
• Improved the RGB lights to illuminate the centre of the ADATA XPG Defender Pro front panel.
  
• Changed the pathing of the Cryorig C7 cable to prevent it clipping through RAM.
  
• Main power cable clips through the InWin 925 case.
  
• GPU power cables will no longer clip through the ZOTAC GAMING GeForce RTX 3070 Twin Edge OC.
  
• Rerouted the CPU power cable to prevent it clipping with the top panel dust filter in ADATA XPG Battlecruiser case.
  
• Adjusted the routing of 24-pin cable in the Raijintek Asterion Plus case to reduce clipping issues.
  
• Adjusted the routing of 24-pin cable in the ADATA XPG Defender Pro case to reduce clipping issues.
  
• Peripheral cables will now be far less likely to clip through PC cases.
  
• Improved the quality of the CPU Handle Highlight of the MSI B450 TOMAHAWK motherboard.
  
• Fixed collision issues between dust and the Antec P110 Luce case.
  
• NVIDIA GPU power cable extensions will no longer clip through the ADATA XPG Battlecruiser case side panel.
  
• Fixed several clipping issues between the cables and the PSU in the EVGA DG-7 series cases.
  
• Fixed an issue with the GIGABYTE AORUS FI27Q-P monitor which led to visual artefacts.
  
• Cables will now be routed more naturally inside the NZXT H700i case.
  
• EKWB EK-Supremacy EVO CPU blocks will now correctly use AMD CPU mounts on AM4 motherboards.
  
• Fixed an issue which caused the EVGA FTW3 2080ti to be un-interactable in the In Win A1 case.
  
• Adjusted the collision checks of the Silverstone HE02 CPU Cooler for randomly generated PCs.
  
• Adjusted the collision checks of the NZXT Kraken M22 AIO to reduce the number of RAM conflicts in randomly generated PCs.
  
• Adjusted the collision checks of the NZXT Kraken X42 AIO to reduce the number of RAM conflicts in randomly generated PCs.

• Fixed an issue which prevented players from completing the hidden objective for the "ZE-nith" job under certain circumstances
  
• Corrected a UI issue which led the "Use mobile" text to appear too far away from the icon in the Esports Expansion DLC.
  
• Fixed tournament monitors' display alignment in the Esports Expansion DLC.

• Corrected a UI issue which caused the Tournament Tutorial to display the default keybind for the Finish Work action.
  
• Tournament monitors will now connect to their power cables, science wins again.
  
• Corrected several cable issues with peripherals on the main desk PC in the third Esports Expansion workshop.
  
• Fixed an issue which led plants to present corrupted textures inside the Default workshop.
  
• The calendar will no longer clip through the door frame inside the Default workshop.
  
• Corrected the alignment of the power plug cable on the first workbench in the first workshop.
  
• Adjusted the spawn point of the Fractal Design workshop in career mode.
  
• Moved the power plug cable to prevent clipping with the workbenches inside the Overclockers UK workshop.

• Fixed illumination issues on several interactable objects when the light is switched off in the third IT Expansion workshop.
  
• Removed an incorrect texture present on the ceiling of the fourth IT Expansion workshop.
  
• Outlets and power cables are no longer doubled in Pathe.Elster@irra.tech off-site job.
  
• The desk texture is no longer missing in the Pathe.Elster@irra.tech off-site job.
  
• Removed an incorrect texture present above the inventory cabinet between the wall and the ceiling inside the fourth IT Expansion workshop.
  
• HDMI cable now correctly visible for the main desk monitor in the fourth IT Expansion workshop.
  
• Peripheral cables now correctly visible for the main desk in the fourth IT Expansion workshop.

• Fixed an issue which caused text to be missing in the email for the "FW: Account Stop" job given by Charles.Mattrick@irra.tech when the player language is set is Korean.

Are you tired of contemplating the phrase “silent as the grave” and want to have your say? Put together more PCs than sea turtles? Follow our guidelines and join the crew on all our official platforms here: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

Today we're pushing a minor update live to address two critical issues listed below. Special thanks to the community for contributions to bug reporting and evidence gathering.

• Fixed an issue which caused PCs to duplicate under certain circumstances.
  
• Fixed an entitlement issue which sometimes prevented Overclocked Edition DLC from correctly appearing in player inventories.

Do you believe the only good bug is a fixed bug? Would you like to know more? Do your part and join us on all our official platforms today: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

Today we're pushing a minor update live to address the issues listed below. Special thanks to the community for contributions to bug reporting and evidence gathering.

• Fixed an issue which caused the be quiet! Dark Base 900 case's Side Panels to only be selectable by their screws during first removal.
  
• Team Group CARDEA ZERO Z340 M.2 PCIe SSDs will no longer appear stretched when installed in the MSI B450I GAMING PLUS AC motherboard
  
• Adjusted collision on the NZXT Kraken Z73 AIO to allow installation in significantly more cases.
  
• Adjusted collision on the GamerStorm Captain 360 EX WHITE RGB AIO to allow installation in significantly more cases.
  
• RAIJINTEK ELEOS RBW's bracket clips will now obey the laws of physics, preventing them from clipping through GPUs/heatsinks.
  
• Fixed an issue which prevented the MSI MPG Z590 Carbon EK X from connecting to custom water cooling in the InWin 925 case.
  
• M.2 drives can no longer be interacted with while the drive bay is closed on the ASRock Z390 Taichi motherboard.
  
• Improved the colour accuracy of the ZOTAC RTX 3070 Ti AMP Holo, 3080 Ti AMP Holo and 3090 AMP Core Holo GPU's.
  
• Corrected benchmark data for the Colorful iGame GeForce RTX 30-series bilibili GPUs.
  
• Reduced the number of clipping issues between cables and power supplies in the InWin A1 case.
  
• All liquid coolers in the ENKI series now flow in the same direction.
  
• Cooler Master MasterLiquid ML240 Illusion logo is now visible from more angles.
  
• Corrected the alignment of the Cooler Master MasterLiquid ML240 Illusion logo.
  
• Fixed an issue which led to the Cooler Master MasterBox NR200P case clipping with SSD cables.
  
• AIO screws will now properly align when installed inside the Lian Li LANCOOL ONE Digital case.
  
• Fixed an issue which caused AIO cables to clip through the ASUS ROG ZENITH EXTREME motherboard when installed inside the Lian Li O11D XL-X case.
  
• Air coolers will now correctly return to starting positions before installation if partially rotated during the mounting process.

• Fixed an issue which caused the job 'Can you fix this' from Daniel.Ryder@LaboratoriousDaniel.com to generate with some parts colliding.
  
• Changed cable pathing in the SilverStone P14 to prevent cables clipping through the case in the first career mode job of the game.
  
• Esports DLC:
  
• The ADATA Spectrix D60G RGB will no longer clip through objects and tables whilst in tournament areas.
  
• Adjusted the 'Disaster job' given by Frink@dragons.com to fix an issue which prevented it from being completed.

• Corrected viewport boundaries of the Raijintek METIS case to prevent the camera clipping through workbenches in the first IT Expansion workshop.
  
• Monitors will no longer clip with certain cases whilst in assembly mode.

Do you believe the only good bug is a fixed bug? Would you like to know more? Do your part and join us on all our official platforms today: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

Today we’re pushing a small patch following v1.14.

• Fixed an issue where the Cooler Master MasterLiquid ML200P MIRROR liquid cooler could not be installed in some cases.
  
• Fixed a problem where the side panel gets misplaced after being removed and installed back in the Fractal Design Define 7 Compact cases.
  
• Fixed an issue where players could only achieve 4 Kudos instead of 5 in the IT Expansion job "Me again..." from Aabirah.Buksh@irra.tech.
  
• Fixed a problem where the CORSAIR XD3 RGB Combo reservoir could not be plugged into the GIGABYTE X570I AORUS PRO WIFI when installed in the Cooler Master MasterBox NR200P case.
  
• Fixed an issue where the CORSAIR iCUE 5000X RGB case had the wrong model.
  
• Fixed an art issue with the CPU handle texture for the ASRock X570 Extreme4 motherboard.

Looking for more white parts? Speculating on our next major update? Awaiting the imminent release of our newest console patch? Come talk to us on all our official platforms here:
Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team

After adding the long-awaited Cooler Master NR200P to the game we’ve once again teamed up with Cooler Master to celebrate. This time they’re giving away three of their bestselling SFF cases – already settled on some parts in game? Here’s your chance to bring it to life. Entries must be made via the Gleam page here: https://gleam.io/dVsyn/nr200p-colour-x-pc-building-sim-giveaway

Once again, this competition is open world wide!

It’s nearly the end of the year but we still have time for another major update - welcome to patch v1.14. It’s the season of giving so we’re starting everyone off with another free workshop, showing off the 30 series Ti cards from NVIDIA, chilling with new Cooler Master AIOs, keeping it together with the latest ASRock motherboards, and remembering to add more memory.

First though, we’re pushing small form factor to the limit…

Often requested, today we’re bringing one of the most popular ITX cases to PC Building Simulator. Now available in a long list of colour options, including the Sakura limited edition variant, the NR200P offers support for triple slot GPUs in a small package.

We’re celebrating bringing another iconic case to PC Building Simulator by once again teaming up with Cooler Master to give away 3 real ones which we’ll have full details of in a separate post.

To celebrate the success of the free IT expansion we’re following up with an Irratech inspired gift, giving players their own executive suite as another free workshop offering.

Whether you’re longing to assemble computers on fancy stone topped tables or wish you could store parts in a complicated multi-drawer arrangement topped with trophy and katana - think of it as an early seasonal treat from us. Usable in free build or career mode, what better way to show you can be up to 50% of your own boss subject to paying off Uncle Tim?

We’re also adding some additional DEKOR items as a shout out to some of our favourite workshop clutter, allowing fans to take a bit of seasonal or branded goodness along with them to personalise the IT Expansion career areas.

Big NZXT Puck Mascot

Mini AORUS ROBOT

• Mini Halloween pumpkin
  
• Mini Christmas tree
  
• RAZER Toast
  
• Small NZXT Puck
  
• Big NZXT Puck Mascot
  
• NZXT bottles
  
• ROG Jacket in glass
  
• Overclockers Jellybeans
  
• Overclockers CPU Chocolates
  
• Overclockers fridge
  
• AORUS VR headset
  
• Mini AORUS ROBOT
  
• Esports Fishbowl
  
• Esports Teams Watches

ZOTAC GAMING GeForce RTX 3090 AMP Core Holo

COLORFUL iGame GeForce RTX 3070 bilibili E-sports Edition OC LHR-V

ASRock TRX40 Taichi

• ASRock X570 Pro4
  
• ASRock X570 Extreme4
  
• ASRock Z590M-ITX/ax
  
• ASRock Z590M Phantom Gaming 4
  
• ASRock Z590 Phantom Gaming 4
  
• ASRock TRX40 Taichi
  
• ASRock B550M-ITX/ac
  
• ASRock B550 Pro4

• Cooler Master MasterBox NR200P (Includes Black, Caribbean Blue, Sunset Orange, Flamingo Pink, Nightshade Purple, White, and limited edition Sakura variants in both windowed and windowless)

• Cooler Master SickleFlow 120
  
• InWin Luna AL120

• RAIJINTEK ELEOS RBW

• Cooler Master MasterLiquid ML360 Mirror TR4 Edition
  
• Cooler Master MasterLiquid ML360 Illusion
  
• Cooler Master MasterLiquid ML240R RGB Phantom Gaming Edition
  
• Cooler Master MasterLiquid ML240 Illusion White Edition
  
• Cooler Master MasterLiquid ML240 Illusion
  
• Cooler Master MasterLiquid ML240 Mirror
  
• G.Skill ENKI 360 AIO
  
• G.Skill ENKI 280 AIO
  
• G.Skill ENKI 240 AIO
  
• RAIJINTEK EOS 360 RBW
  
• RAIJINTEK EOS 240 RBW
  
• InWin BR36

• NVIDIA 3080Ti Founders Edition
  
• NVIDIA 3070Ti Founders Edition
  
• NVIDIA 3060Ti Founders Edition
  
• COLORFUL iGame GeForce RTX 3070 bilibili E-sports Edition OC LHR-V
  
• COLORFUL iGame GeForce RTX 3060 Ti bilibili E-sports Edition OC LHR-V
  
• COLORFUL iGame GeForce RTX 3060 bilibili E-sports Edition OC 12G-V
  
• ZOTAC GAMING GeForce RTX 3090 AMP Core Holo
  
• ZOTAC GAMING GeForce RTX 3080 Ti AMP Holo
  
• ZOTAC GAMING GeForce RTX 3070 Ti AMP Holo
  
• ZOTAC GAMING GeForce RTX 3060 Ti Twin Edge OC

• Intel® Core™ i9-10980XE Extreme Edition Processor

• TEAMGROUP T-Force Dark Pro DDR4 3466MHz
  
• TEAMGROUP T-Force Dark Pro DDR4 3333MHz
  
• TEAMGROUP T-Force Dark Pro DDR4 3200MHz
  
• TEAMGROUP T-Force Dark Pro DDR4 3000MHz
  
• TEAMGROUP T-Force ZEUS DDR4 3200MHz
  
• TEAMGROUP T-Force ZEUS DDR4 3000MHz
  
• TEAMGROUP T-Force ZEUS DDR4 2666MHz
  
• G.Skill Trident Z Royal DDR4 4266MHz (Gold)
  
• G.Skill Trident Z Royal DDR4 4266MHz (Silver)

• RAIJINTEK FORKIS ELITE
  
• RAIJINTEK FORKIS PRO RBW

• TEAM GROUP DELTA Phantom Gaming RGB SSD
  
• TEAM GROUP DELTA TUF Gaming Alliance RGB SSD
  
• TEAM GROUP CARDEA ZERO Z340 M.2 PCIe SSD

• EVGA GeForce RTX NVLink SLI Bridge for RTX 3090 (4-Slot Spacing)

• Fixed an issue which caused the Deepcool GAMMAXX 400 CPU Cooler to behave unnaturally when seen through the glass side panel in the CORSAIR Crystal Series 570X RGB case.
  
• Adjusted cable routing to prevent cables clipping through the side panel in the be quiet! Silent Base 801 case.
  
• Corrected the pricing of the EVGA SuperNOVA 1600 series PSUs to recognise efficiency variant costs.
  
• The PSU Cradle of the NZXT H710i case can no longer be installed when the PSU is plugged into the power socket.
  
• ADATA XPG LEVANTE 360 AIO Cooler mounting brackets are now correctly shown in the inventory image.
  
• Reduced the number of conflicts that occur between the case fan and reservoir inside the Lian Li O11D case series.
  
• Fixed an issue which prevented USBs from being plugged in to the EVGA Z270 FTW K motherboard.
  
• GPU Tuner "Core Clock" setting now works as expected for the ASRock Radeon RX 6800 XT Taichi X 16G OC GPU.
  
• Adjusted cable routing to reduce instances of the 24-pin power cable clipping through the bottom of the Kolink Stronghold case when it's not plugged into the motherboard.
  
• Increased the total number of fan headers on the MSI MEG Z390 ACE motherboard to match its real-life counterpart.
  
• Fixed an issue that caused the solid side panel of the Fractal Design Define 7 XL to be replaced with a tempered glass side panel when reassembling the case.
  
• Radiators can no longer be installed through the drive bays on the bottom of the Fractal Design Define 7 XL cases.
  
• Adjusted collision to prevent the be quiet! Shadow Rock LP CPU Cooler getting stuck when installed in the Raijintek METIS case.
  
• Players can now interact with the Fractal Design Meshify C power button as intended.
  
• Adjusted the memory frequency of the ZOTAC GAMING GeForce RTX 3070 Twin Edge OC White Edition GPU to match its real-life counterpart.
  
• Significantly reduced the number of cable clipping issues with the SilverStone FT05 case.
  
• Adjusted collision to prevent drive bays clipping with radiators in the be quiet! Dark Base 900 case.
  
• Significantly reduced the number of cable clipping issues with the SilverStone CS381 PC case.
  
• Significantly reduced the number of clipping issues with the be quiet! Dark Base Pro 900 rev 2 case.
  
• Fixed an issue which caused case fans to conflict with several CPU coolers in the Deepcool MATREXX 55 case.
  
• Reduced the number of clipping issues which occur inside the Fractal Design Meshify C case.
  
• E-ATX motherboards will no longer incorrectly clip with the reservoirs inside ADATA XPG Battlecruiser case.
  
• Added a missing beauty panel to the ADATA XPG Defender Pro case.
  
• Reduced erroneous collisions in the ASUS ROG ZENITH EXTREME motherboard's CPU socket.
  
• Cables of Non-Modular and Semi-Modular PSUs now behave more naturally when installed in the In Win 303-MSI Dragon Edition case.
  
• Moved the ARCTIC Freezer A13 X CPU Cooler cable to prevent it clipping through the side panel when installed in the SilverStone RVX01 case.
  
• Adjusted routing for the 24-pin cable to prevent it clipping through memory inside the Fractal Design Node 202 case.
  
• Corrected instances of RGB lighting incorrectly interacting with pipes when some coolant colours are used.
  
• Adjusted routing for the 24-pin cable to prevent it clipping inside the SilverStone PS14 Case.
  
• Significantly reduced the number of clipping issues present inside the Kolink Stronghold case.
  
• Corrected SSD cabling paths in several be quiet! cases.
  
• Changed cable routing to prevent the NZXT N7 Z390 motherboard cables clipping with several liquid coolers.
  
• Cables inside CORSAIR Crystal Series 570X RGB will now behave more naturally.
  
• Adjusted cable routing to prevent clipping inside the CORSAIR Obsidian Series 1000D case.
  
• Fixed an issue which caused fans to erroneously show conflict issues with reservoirs when installed in the third bottom slot of Lian Li O11D cases.
  
• Adjusted second GPU placement to prevent clipping with the drive bays in the CORSAIR Obsidian Series 750D case when using certain motherboards.
  
• Cable routing for longer GPUs installed in the Cooler Master Silencio S400 should now appear more natural.
  
• ASUS ROG logo on the ASUS ROG SWIFT PG27UQ is now the correct brightness.
  
• Reduced the number of erroneous collisions with the EVGA Z270 FTW K motherboard.
  
• Fixed an issue with the player viewport which caused the Raijintek CALORE C360D radiator lighting to flash at certain camera angles.
  
• Corrected the placement of front radiator slots in the ADATA XPG Defender Pro case.
  
• Reduced the number of instances causing cable clipping to occur inside the CORSAIR Obsidian Series 500D case.
  
• Players can no longer install SSDs through the side panel of the CORSAIR Carbide SPEC-06 RGB case.

• Players can no longer ignore physics by using the slide from below in the 3rd IT expansion workshop.

• Adjusted a job which required installation of an Intel Core i7-7700K CPU before it is available in the shop.
  
• The job "Brady…" from Stef Breeze will no longer generate PCs with incompatible CPU/Motherboard combinations.
  
• Fixed multiple clipping issues with the desk in the off-site "People Problems" Job.
  
• Adjusted storage parameters for the "Replace M.2" task in Connie.Vitte@irra.tech - "ABORT! ABORT! ABORT!" job.
  
• Jobs in the IT expansion requesting certain wallpapers now have more lenient objective completion.
  
• Improved information clarity in the email for the "All set to go live with this gold idea" job given by Chaz.Mattrick@irra.tech.
  
• Fixed an issue which prevented PCBay post-it notes from spawning in the IT Expansion workshops when used in the base game.

• The Email app will now properly update on the PC if the player reads new emails on the tablet in the IT expansion.
  
• Freestanding items placed In the IT expansion workshops via the DEKOR app will now spawn with the correct collision.
  
• Adjusted the price of the Cooler Master V750 Gold PSU.
  
• EVGA DG-8 series cases correctly list the "3x140mm" Max Radiator Fans. specification in the Shop.
  
• Adjusted the price of EVGA SuperNOVA 1600W PSU series to correctly represent differences in their efficiency ratings.

Do tai chi inspired parts bring you a small measure of peace? Do you believe the perfect cherry blossom case is a rare thing? Introduce yourself and have a very good conversation on all our official platforms here: Discord[discord.com] / Twitter / Facebook[www.facebook.com] / Instagram[www.instagram.com] / Reddit / YouTube

Cheers,
The PC Building Simulator Team